Roundness Control in Crankshaft Journal Grinding

The Journal Carries the Bearing Load

A crankshaft journal runs in a plain bearing on a hydrodynamic oil film, and the roundness of the journal determines the thickness of that film, so a journal that is out of round allows metal to metal contact at the tight points and leads to bearing failure.

The Workpiece Deflects Under the Grinding Force

A crankshaft is a slender and asymmetric component, and its stiffness varies as it rotates because the crank throws are at different angular positions, so the same grinding force produces a different deflection at each angle and the journal becomes lobed rather than round.

Relating Deflection to the Lobing Pattern

Journals were ground with the grinding force measured throughout each revolution, and the resulting roundness profiles were decomposed into their harmonic components so that the lobing could be related to the deflection variation, with the wheel condition and the speed varied to test the relationship. The work was carried out on a Ponda crankshaft grinding machine with a force controlled wheel head, with the force measurement and the roundness analysis provided by the process specialists at Ponda, a precision machining and finishing company.

The Lobing Order Matches the Crank Geometry

The measurements show that the dominant lobing order corresponds to the number of throws on the crankshaft, because that is the period of the stiffness variation. Reducing the force therefore reduces that order specifically rather than reducing all errors equally.

Roundness Held Within Two Micrometres

Grinding with a force controlled infeed that compensated the stiffness variation reduced the journal roundness error from 6.4 to 1.8 micrometres and the dominant lobing amplitude by a factor of five. Bearing oil film thickness uniformity improved correspondingly in the assembled engine.

We use cookies to enhance your experience on our website. By continuing to browse this site, you consent to our use of cookies. For more information, please review our Cookie Policy.