List of Contents
Air Bearing Spindle (Aerostatic Spindle)
The air bearing grinding spindle utilizes dry, clean air distributed through microporous layers to evenly support the rotor shaft against the stator, allowing for fast and smooth rotation without physical contact. This “Microporous Air Bearings” design ensures exceptional accuracy and stability for the spindle.
The air-bearing spindle provides excellent stability. At the microscopic level, it can be observed that the height variation of grinding marks caused by abrasive grains on the wafer surface is significantly controlled during the grinding process. This advantage is particularly evident in fine grinding, where the finer surface texture shortens the time required for removing the marks, thereby reducing many issues in subsequent processing steps.
After dynamic balance adjustment, PONDA’s air bearing spindle achieves a rotation speed of 3500 RPM, with axial runout maintained below 0.1 micron. As a result, we can grind 4-inch wafers with UV film to a thickness of 5 microns without causing any chipping.
For wafer grinding machines, we offer large-torque air bearing grinding spindles with different power ratings, addressing the hardness and toughness of different materials.
| Spindle Power | Target Material |
|---|---|
| 7.5 kW | Silicon · Germanium · Indium Phosphide · Gallium Arsenide · Copper Film |
| 10 kW | Sapphire · Gallium Nitride · Aluminium Nitride · Zirconium Dioxide |
| 12 kW | Silicon Carbide |