Updates & Insights

Electrochemical Mechanical Planarization of Silicon Carbide

Silicon Carbide Is Chemically Inert at Room Temperature Silicon carbide resists attack by almost every acid and alkali at room temperature, and the passive film

...

Crystal Plane Anisotropy in Chemical Mechanical Polishing of Beta Gallium Oxide

The Surface That Must Be Finished Depends on the Device Beta gallium oxide is grown as a bulk crystal and devices are fabricated on several

...

Roundness Control in Crankshaft Journal Grinding

The Journal Carries the Bearing Load A crankshaft journal runs in a plain bearing on a hydrodynamic oil film, and the roundness of the journal

...

Mapping Straightness Error in Linear Guideways

Straightness Varies Along the Travel A linear guideway is never perfectly straight, and the deviation varies along the travel in a way that depends on

...

Surface Integrity in Milling of TC17 Titanium Alloy

A Titanium Alloy for Compressor Discs TC17 is a high strength titanium alloy used for compressor discs in aeroengines, and its fatigue performance is sensitive

...

Planar Polishing of Aluminium Plates for Surface Appearance

Aluminium Is Soft and Adheres to the Abrasive Aluminium is soft and chemically reactive, so it adheres to abrasive particles and to the polishing tool,

...

Online Monitoring of Polishing Pad Wear

The Pad Changes Throughout Its Life A polishing pad wears continuously, its surface texture changes, its thickness falls and its ability to transport slurry deteriorates,

...

Subsurface Damage in Double Sided Lapping of Silicon Wafers

Lapping Is the Step That Sets the Damage Depth Silicon wafers are lapped after slicing to flatten them and to remove the saw damage, and

...

Dwell Time Optimisation in Ion Beam Figuring of Optical Surfaces

The Beam Removes Material Without Contact Ion beam figuring removes material by sputtering with a beam of ions, so there is no tool contact and

...

Error Sources in Slow Slide Servo Turning of Non Rotationally Symmetric Surfaces

The Servo Must Track a Large Slow Motion A slow slide servo generates a non rotationally symmetric surface by moving the tool along the spindle

...

Tool Wear in Diamond Turning of Copper Mirrors

Copper Is Soft but Chemically Aggressive Copper is soft enough to be cut easily, but it reacts with the diamond at the cutting temperature and

...

Formation of Machining Marks in Diamond Turning of Germanium

Germanium Is Turned for Infrared Optics Germanium is the standard material for infrared lenses and windows, and it is finished by single point diamond turning

...

We use cookies to enhance your experience on our website. By continuing to browse this site, you consent to our use of cookies. For more information, please review our Cookie Policy.